Filter
Top Products
21 En
Connections
English
PREPARATION
Once all connections are complete, plug the power cable
into the AC wall outlet.
■ AC OUTLETS (SWITCHED)
Use these outlets to supply power to any connected
components. Connect the power cable of your other
components to these outlets. Power to these outlets is
supplied when this unit is turned on. However, power to
these outlets is cut off when this unit is set to the standby
mode. For information on the maximum power or the total
power consumption of the components that can be
connected to these outlets, see “Specifications” on
page 70.
■ Turning on this unit
Press
1
STANDBY/ON (or
M
POWER) to turn
on this unit.
y
When you turn on this unit, there will be a 4 to 5-second delay
before this unit can reproduce sound.
■ Set this unit to the standby mode
Press
1
STANDBY/ON (or
N
STANDBY) to set
this unit to the standby mode.
In the standby mode, this unit consumes a small amount of
power in order to receive infrared signals from the remote
control.
Connecting the power cable
AC OUTLETS
Power cable
Turning on and off the power