Yamaha RX-V357 Stereo Receiver User Manual


 
25
BASIC
OPERATION
English
TEST
PROG PROG
STEREO
LEVEL
SET MENU
q
/DTS 6.1/5.1
NIGHT SLEEP
MUTE
VOLUME
VOLUME
1,2
PROG PROG
PROG PROG
Selecting a sound field program
You can enhance your listening experience by selecting
sound field programs. For details about each program, see
pages 28 – 31.
1 Press PROGRAM l / h (or PROG –/+ on the
remote control) to select the desired
program.
The name of the selected program appears on the
front panel display.
y
Select a program based on your listening preference. Program
names are just for reference.
2 After selecting the desired program, press
the same button repeatedly to cycle through
sub-programs if available.
Example: Pressing MOVIE 2 repeatedly
switches the sub-program between
“Adventure” and “General”.
Notes
•There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
format and not all sub-programs can be used with all input
signal formats.
•You cannot use the digital sound field processor with a source
connected to the 6CH INPUT jacks of this unit or when the
unit is reproducing a digital source with a sampling frequency
greater than 48 kHz.
•The acoustics of your listening room affect sound field
programs. Minimize sound reflections in your room to
maximize the effect created by the program.
When you select an input source, this unit automatically
selects the last sound field program used with that source.
When you set this unit in standby mode, it stores the current
source and sound field program in memory and automatically
selects them when you turn on the power again.
If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the sound field program (No. 7–9)
automatically switches to the appropriate decoding program.
•When the unit is reproducing a monaural source with PRO
LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound is output from the front and surround speakers.
Sound can only be heard from the center speaker. (If “1A
CENTER” on the set menu is set to NONE, the center channel
sound is output from the front speakers.)
PLAYBACK
V-AUXVCR
DTV/CBL
DVD
MD/CD-R
TUNER CD
VOLUME
LCR
SL
LFE
SR
Adventure
dB
V-AUXVCR
DTV/CBL
DVD
MD/CD-R
TUNER CD
VOLUME
L
C
R
SL
LFE
SR
General
dB
or
Front panel Remote control
PROGRAM
or
Front panel Remote control
PROGRAM
PRESET/TUNING
EDIT
FM/AM A/B/C/D/E
NEXT
PRESET/TUNING
INPUT MODE 6CH INPUT
SET MENU
MEMORY
MAN'L/AUTO FM
TUNING MODE
AUTO/MAN'L MONO
FREQ/TEXT EON
PTY SEEK
MODE START
VOLUME
STEREO PROGRAM INPUT
EFFECT
TONE CONTROL
BASS/TREBLE
STANDBY
/ON
PHONES
SILENT CINEMA
SPEAKERS
A/B/OFF
1,2