Filter
Top Products
Notes
●
A new setting can be programmed in place of the former
one.
●
For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is turned off or the
power plug is disconnected from the AC outlet or the power is
cut due to temporary power failure. If, however, the power is
cut for more than two weeks, the memory may be erased. If
so, it can be re-programmed simply by following the PRESET
TUNING steps.
18
PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using preset station buttons. With this function, you can
select any desired station simply by pressing the corresponding preset station button. Up to 40 stations (8 stations per page) can
be programmed.
Tune to the desired station.
(Refer to the previous page for tuning procedures.)
Select the desired page (A – E) of preset station
buttons while watching the display.
Press a preset station button before “MEMORY” goes
off from the display.
* In the same way, program other stations to A2, A3 ... A8.
*
You can program more stations to the preset station buttons on
other pages in the same way by selecting other pages in step 2.
Select the page of preset station buttons.
Select the desired preset station button.
To program stations To recall a preset station
1
2
3
4
11
22
Illustrations: RX-V1070
Parts in shaded areas ( )
are not present on RX-V870.
2, 11
3
4, 22(Preset station buttons)
A
/
B
/
C
/
D
/
E
PRESET
FM
AUTO
A
/
B
/
C
/
D
/
E
PRESET
FM
AUTO
MEMORY
STEREO
0
MHz
40
60
80
100
MEMORY
CONCERT
HALL
PRESET
STEREO
0
MHz
40
60
80
100
FM
AUTO
CONCERT
HALL
Shows the displayed station
has been programmed to A1.
Flashes for about 5 seconds.