Filter
Top Products
English
E-5
SPECIFICATIONS
Type .......................................3-way 3-speaker bass reflex
speaker system
Magnetic shielding type
Driver ............................................ 20 cm (8”) cone woofer
Wave guide horn 13 cm (5”) cone mid-range
Wave guide horn 3 cm (1”) dome tweeter
Impedance ................................................................... 6 Ω
Frequency Response ................................45 Hz to 50 kHz
Nominal Input Power ................................................ 100 W
Maximum Input Power.............................................. 300 W
Sensitivity ...................................................91 dB/2.83 V/m
Crossover Frequency ...................................600 Hz, 4 kHz
Dimensions (WxHxD).......................364 x 1062 x 397 mm
(14-5/16” x 41-13/16” x 15-5/8”)
Weight ............................................29.0 kg (63 lbs. 15 oz.)
Accessories......................................................... Spike x 4
Nut x 4
● Specifications subject to change without notice due to
product improvements.
● Care should be taken not to exceed the input power
values noted above.
ATTACHING THE FRONT COVER
The speaker and the front cover are packed separately.
To attach the cover, line up the six pegs on the speaker
with the six corresponding holes on the inside surface of
the cover and push gently.
To remove the cover, hold on to both sides and slowly pull
straight away from the speaker.
Note
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive
force with tools.