Filter
Top Products
4
• To relocate the unit, turn the power switch off, remove
the power plug from the AC outlet, and remove all con-
necting cables. Damaged cables may cause fire or elec-
trical shock.
• Turn off all musical instruments, and audio equipment
when connecting to this unit. Use the correct connect-
ing cables and connect as specified.
• Always lower the volume control to minimum before
turning on the power to this unit. A sudden blast of
sound may damage your hearing.
• Do not output distorted sounds for long periods of
time, as this will cause the speaker to heat up, leading to
a fire hazard.
• Do not raise the volume of speakers to a level that
makes you feel uncomfortable. Listening to loud music
for long periods can damage your hearing.
• If you know you will not use this unit for a long period
of time, such as when going on vacation, remove the
power plug from the AC outlet. Leaving it connected is a
potential fire hazard.
• To prevent electrical shock when cleaning the unit,
remove the power plug from the AC outlet.
• XLR-type connectors are wired as follows: pin 1:
ground, pin 2: hot (+), and pin 3: cold (–).
• This speaker is magnetically shielded. However, if a
nearby monitor displays any uneven colors, place it fur-
ther away from the monitor.
• Using a mobile telephone near this unit may induce
noise. If noise occurs, use the telephone away from the
unit.