Filter
Top Products
ENGLISH
6
MIC LINE AMPLIFIER
Rear Panel
8 AC IN connector
Connect the included power cord here. First, connect the
power cord to the MLA8, then insert the power cord plug
into the AC outlet.
Be sure to use the included power cord.
Use of other cords may result in
malfunction, heat generation, or fire.
9 INPUT 1–8 connectors
These balanced XLR-3-31-type connectors are used to
input analog signals to the corresponding channels.
) OUTPUT connectors
There are two types of balanced output connectors:
Euroblock connectors and D-sub 25-pin connector.
●Euroblock connectors
The device has four Euroblock connectors with six pins.
These dual channel connectors consist of three pins:
hot, cold, ground on each channel. The supplied
Euroblock plugs should be wired as shown. Tighten the
screws to secure the wires.
●D-sub 25pin connector
Using the optional I/O card (MY8-AD96), you can
connect to the Yamaha DM2000 Digital Mixer.
Connection Example
Connecting to the DM2000
You can connect the device to Yamaha digital audio
equipment using the D-sub 25-pin connector.
For connection to the DM2000, you will need the optional
I/O card (MY8-AD96).
1234
5678
INPUT
123
4567
8
GG
ANALOG
OUTPUT
+4dBu
OUTPUT +4dBu
AC IN
)
9
8
+
–
G
OUT PUT
D-sub 25-pin cable
Optional I/O card MY8-AD96
Digital mixer DM2000
MLA8
1234
5678
INPUT
123
4567
8
GG
ANALOG
OUTPUT
+4dBu
OUTPUT +4dBu
MIC LINE AMPLIFIER
MODEL MAL8
MADE IN INDONESIA
AC IN