Filter
Top Products
15
ENGLISH
Fault
Playback sound is muffled and high
frequencies are inaudible.
When playing back tapes recorded on
other decks, meter deflections are
greater (smaller) than when recording.
Cause
¶ A tape recorded without Dolby NR is
played back with Dolby NR on.
¶ Heads are dirty.
¶ Heads are magnetized.
¶ Basic levels are different for different
cassette decks.
Cure
¶ Playback in OFF position.
¶ Clean heads and carry out
demagnetization with head
demagnetizer.
¶ This is not a fault.
SPECIFICATIONS
Track Configuration ....................4 track, 2 channel stereo
Motor ........................................... DC servo motor (capstan)
DC motor (reel)
DC motor (tray)
Head ........................................... Recording: hard permalloy
Playback: hard permalloy
Erase: double-gap Ferrite
Rapid Transport............................................95 sec. (C-60)
Wow and Flutter
W.RMS .................................................... less than 0.05%
W.Peak.................................................. less than ±0.08%
Signal-to-Noise Ratio
(Dolby NR off) ......................................better than 60 dB
(Dolby B NR on) .................................. better than 68 dB
(Dolby C NR on) .................................. better than 76 dB
Frequency Response
Normal tape (–20 dB)................... 20 - 17,000 Hz ±3 dB
High (CrO2) tape (–20 dB)............ 20 - 18,000 Hz ±3 dB
Metal tape (–20 dB) ...................... 20 - 20,000 Hz ±3 dB
Harmonic Distortion
Normal tape ............................................. less than 0.8%
High (CrO2) tape...................................... less than 0.8%
Metal tape................................................. less than 0.8%
Input Sensitivity/Impedance
Line .................................................... 100 mV/50 k-ohms
Output Level
Line ................................................... 570 mV/2.2 k-ohms
Channel Separation (1 kHz)...................................... 40 dB
Cross Talk (125 Hz) ................................................... 55 dB
GENERAL
Power Supplies
Europe model .............................................230 V, 50 Hz
U.K. model and Australia model ..............240 V, 50 Hz
General model ................. 110/120/220/240 V, 50/60 Hz
Power Consumption ...................................................16 W
5 W(POWER OFF)
Dimensions (W x H x D) .....................280 x 119 x 360 mm
(11 x 4-11/16" x 14-3/16")
Weight ..................................................4.8 kg (10 lbs. 9 oz.)
Accessories
Connecting cords ......................................................... 2
* Specifications subject to change without notice.