Filter
Top Products
English
12
HS80M/HS50M/HS10W Owner’s Manual
Rear Panel
HS80M, HS50M
1 POWER switch
Turns power to the speaker on or off. When the power is
turned on the tuning fork mark on the front panel will light.
" LEVEL control
Adjusts the overall output level.
# INPUT 1/2 connector
These are balanced XLR-type and phone type input
connectors.
Do NOT use both the XLR and Phone type connector at the same
time. Please connect to only one of these connectors.
$ MID EQ switch
Adjusts the level of the mid-frequency range. Setting the
switch to the “0” position produces a flat frequency response.
With the “+2 dB” setting, the mid range is boosted by 2 dB.
With the “-2 dB” setting, the mid range is cut by -2 dB.
(Center frequency is 2 kHz.)
% ROOM CONTROL switch
Corrects the low frequency exaggeration caused by reflecting
off ceilings, walls and floors. Setting the switch to the “0”
position produces a flat frequency response. With the “-2 dB”
setting, the range below 500 Hz is cut by 2 dB. With the “-4
dB” setting, the range below 500 Hz is cut by -4 dB.
& HIGH TRIM switch
Adjusts the level of high-frequency range.
HS50M: Setting the switch to the “0” position produces a flat
frequency response.
With the “+2 dB” setting, the range above 3 kHz is
boosted by 2 dB. With the “-2 dB” setting, the
range above 3 kHz is cut by -2 dB.
HS80M: Setting the switch to the “0” position produces a flat
frequency response.
With the “+2 dB” setting, the range above 2 kHz is
boosted by 2 dB. With the “-2 dB” setting, the
range above 2 kHz is cut by -2 dB.
' LOW CUT switch
Cuts the low-frequency range. With the “80 Hz” setting the
range below 80 Hz is cut. With the “100 Hz” setting the range
below 100 Hz is cut.
( AC IN Connector
Connect the supplied power cable here. First connect the
power cord to the speaker, then insert the power cord plug
into the AC outlet.
ROOM CONTROL
HIGH TRIM
+2dB
+2dB
0dB
0dB
-2dB
-2dB
0dB
-2dB
-4dB
+2dB
0
-2dB
0
-2dB
-4dB
+2dB
0
-2dB
-10dB
+4dB
1
2
MID EQ
ROOM
CONTROL
HIGH
TRIM
LOW CUT
FLAT
80Hz
100Hz
MID EQ
LOW CUT
OFF
INPUT
LEVEL
POWER
ON
AC IN
2kHz
3kHz
500Hz
100Hz
80Hz
FLAT
MIN
+2dB
+2dB
0dB
0dB
-2dB
-2dB
0dB
-2dB
-4dB
2kHz
2kHz
500Hz
100Hz
FLAT
80Hz
ROOM CONTROL
HIGH TRIM
MID EQ
LOW CUT
HS50MHS80M
!
"
#
$
%
&
'
(