Yamaha EMX100CD CD Player User Manual


 
E-32
CD CHANGER RECEIVER EMX
100CD
PHONES
POWER
DISC
123
PROGRAM
ECHO ECHO
MUSIC
USER
MEMORY
INPUT SELECTOR
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
VOLUME
RANDOM
DISPLAY
MIC
MIN MAX
MIC MIXING
REPEAT TIME MEMORY AUTO/MAN'L
HOUR
PRESET/TUNING/BAND
A/B/C/D/E
MIN TIME ADJ TIMER
OPEN/
CLOSE
DISC
CHANGE
HOW TO USE THE BUILT-IN TIMER
Timer play
By using the built-in timer, you can set the time when the unit
turns on and a source begins playing automatically, and the
time when the unit turns off automatically.
1 Prepare the source to be played.
For tuner:
Tune in to the station you will listen to.
For CD player:
Load a disc on the disc table. If more than one disc are
loaded on the disc table, select the disc by using the
DISC selector buttons or the DISC SKIP button.
2 Press the DISPLAY button.
Whenever the DISPLAY button is pressed, the display
mode changes as follows.
On each mode, make a setting for the timer play,
following the setting procedure described below.
Current time (TIMER on/off mode)
Source selecting mode (TUNER, CD)
ON TIME/Time setting mode
OFF TIME/Time setting mode
Normal display mode
Note
The display mode will be changed to the next mode after
about 8 seconds elapse in turn automatically. If the mode
is changed before the setting is completed, call the mode
again by pressing the DISPLAY button once or more.
Setting procedure:
Current time
Check to be sure that the current time is correct, and
press the TIMER button so that “TIMER” lights up on
the display.
Source selecting mode
Select the source (TUNER or CD) to be played with
the INPUT SELECTOR button.
* If “TUNER” is selected, soon it is changed to the
frequency display mode. In this mode, you can
select the station to listen to with the timer play by
using the PRESET/TUNING/BAND selector button,
A/B/C/D/E button and / buttons.
→→→
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B C D
+I0
E
OPEN
/
CLOSERANDOM
REPEATMODE
6
6
7
7
8
8
9 0
CD
PRESET
TUNER
STOP
INPUT
PLAY
/
PAUSE
LEVEL
MUSIC
TEST FLAT
CENTER
/
REAR
/
DELAY
ECHO
PROGRAM
USER
POWER
DISPLAY
SLEEP
VOLUME
2
2- 2-
2-
2-
2-*