Filter
Top Products
14
REMOTE CONTROL “LEARNING” FUNCTION
(U.S.A., Canada and General models of CX-2 only)
The keys on this remote control transmitter can be programmed to “learn” key-functions from other remote control transmitters
without losing the preset key functions. By using this feature, this unit can then be used in place of one or more other remote control
transmitters, thus making operation of your various audio and video components more convenient. Use the included user program
sheets to indicate a new function learned for each key.
Note
There may occasionally be instances in which, due to the signal-coding and modulation employed by the other remote control
transmitter, this unit will not be able to “learn” its signals.
➊ TRANSMIT/LEARN indicator
➋ YPC-USER-LEARN switch
YPC: Set to this position when using preset key
functions (for controlling this unit and/or
YAMAHA components).
*
“YPC” is the abbreviation of YAMAHA Preset
Code.
USER: Set to this position when using “learned” key
functions.
LEARN: Set to this position when learning new key
functions from other remote control transmitters.
➌ Blank keys
These keys have no preset functions and are used only for
learning other remote control transmitter’s functions.
➍ RESET button
Press this button to “reset” the internal microcomputer
which controls remote control operations. Microcomputer
“reset” is necessary when the remote control freezes.
* Pressing the RESET button will not erase learned
functions.
➎ CLEAR button
This button is used to clear one or all learned key functions.
(Refer to page 16.)
CHAPTER
TAPE 1DIR BDIR A
A B
C D
E F
TAPE 2
REC MUTE
REC
/
PAUSE
MUTE
➊ ➋➌
➌
➍➎