Filter
Top Products
Chapter 2 - Installing the Yamaha CRW4260t Drive
11
9. Connect the power supply cable.
Connect the +12V and +5V 4-pin power cable to the power supply
interface located on the rear panel of the CRW4260t drive.
The shape of the connector makes it impossible to reverse the connections.
10. Tighten the four fastening screws securely.
11. Attach the cover of your computer.
R G L
1 2 4
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
AUDIO OUT
VZ49880-0
1 +5V G +12V
VZ49880-0
SCSI
INTERFACE
CONNECTOR DC INPUT