Yamaha CDX-E400 CD Player User Manual


 
24
SYSTEM CONTROL
Same as CD = TAPE
Recording automatically starts at the beginning of
the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
2 Press DUBBING START to start recording.
Note
The displays 1~4 which include the component you have
not connected to your receiver (RX-E400) will be skipped.
To stop dubbing
Press &.
Before recording
When you record by using MDX-E300 or KX-E300, you
must first make the connections as shown in Connecting
the system on page 5. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300. A source from
the component which is connected to the AUX terminal
component can be recorded on a tape or MD.
Dubbing setting
There are six different combinations of components. Once
you choose a certain mode, recording starts and ends
automatically in a certain way for each mode.
DUBBING
START
DUBBING
MODE
1
2
1 Decide the combination of the components. Each
time you press DUBBING MODE, the mode will
change in the below order.
Recording automatically starts from the beginning
of the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
When the recording on side A finishes while a
track is being played back, the recording on side B
starts from the beginning of the same track.
The sound is automatically faded out when it gets
close to the end of side B.
3
4
Record unitPlay unit
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAUSE
TAPE
REC
/
PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
Record unitPlay unit
0111CRXE400(M).23-25.E 02.6.13, 7:17 PM24