Filter
Top Products
Important Precautions
ii
Installation Precautions
• Install CDR200tx on a level surface.
• Do not install CDR200tx near water, in direct sunlight,
close to heating units, or in areas subject to high or low
temperature extremes, excessive dust, vibration, or severe
shocks.
• Do not expose CDR200tx to extremes of humidity.
• The ambient temperature where CDR200tx is installed
should be between 5°C and 40°C (41°F–104°F).
• Using CDR200tx close to a television or radio may cause
interference. Install CDR200tx at least one meter away
from television and radio equipment.
• Do not block the CDR200tx ventilation slots. Install
CDR200tx with at least 10 cm of free space all-around.
• Make sure the CDR200tx power cord is not located in a
position where it is likely to be walked on or pinched by
other equipment.