Filter
Top Products
FEATURES
2
◆ Highly dynamic power, low impedance drive
capability
◆ Continuously variable loudness control
◆ CD/DVD DIRECT AMP switch used to reproduce the
purest CD and DVD sound
◆ Remote control capability
[ AX-497 ]
◆ Minimum RMS output power
85 W + 85 W (8 Ω), 0.019% THD, 20 Hz to 20 kHz
◆ REC OUT selector independent of input source
selection
◆ PURE DIRECT switch used to reproduce the purest
source sound
[ AX-397 ]
◆ Minimum RMS output power
60 W + 60 W (8 Ω), 0.019% THD, 20 Hz to 20 kHz
◆ TAPE MONITOR switch used to monitor the sound
being recorded
• This document is the owner’s manual for both AX-497 and AX-397. Model names are given where the details of functions are unique
to each model. Illustrations for AX-497 are mainly used for explanations.
• y indicates a tip for your operation.
• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button
names differ between the main unit and the remote control, the names of the buttons on the remote control are given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
Please check that you received all of the following parts.
FEATURES
SUPPLIED ACCESSORIES
CD/DVD PHONO TUNER
POWER
STANDBY
MD
TAPE AUX
+
–
u
d
DISPLAY
A/B
REC
DISC
DIR A
p
DIR B
A/B/C/D/E
PRESET
VOLUME
TAPECD
w
e
f
b
s
a
DISPLAY
Remote control
Batteries (2)
(AAA, R03, UM-4)