Filter
Top Products
SET MENU
39
English
ADJUSTMENTS
7 INPUT MODE (initial input
mode)
Use this feature to designate the input mode for sources
connected to the digital (optical) input jacks when you
turn on this system.
Choices: AUTO, LAST
AUTO
Select this to allow this system to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this system to automatically select the
last input mode used for the respective source.
8 DISPLAY SET (brightness of
front panel display)
■ DIMMER
Use this feature to adjust the brightness of the front panel
display.
Control range: –4 to 0
Initial setting: 0
Press i to increase or j to decrease the
brightness.
9 SP/PRE OUT (output source
settings)
Choices: BOTH, SP, PRE
BOTH
Select this to direct signals to both the speakers connected
to the subwoofer (SW-S80) and the 6CH PREOUT jacks.
SP
Select this to direct signals to the speakers connected to
the subwoofer (SW-S80). (No sound is output from 6CH
PREOUT jacks.)
PRE
Select this to direct signals to 6CH PREOUT jacks or if
you connect your external amplifier to 6CH PREOUT
jacks on this system. (No sound is output from the
speakers connected to the subwoofer (SW-S80).)
E8-S80-35-42(5.29)a 02.6.29, 4:34 AM39