Filter
Top Products
8
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
POWER
ON
OFF
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
POWER
ON
OFF
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
PRE OUT
SUBWOOFER
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
POWER
ON
OFF
OUTPUT INPUT2
TO SPEAKERS
INPUT1
FROM AMPLIFIER
LOW
HIGH
OFF
AUTO
STANDBY
CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER
• Connect the main speakers to the speaker output terminals of the amplifier.
• Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.
• To connect with a YAMAHA DSP amplifier, connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP
amplifier to either the left (L) or right (R) INPUT 2 terminal.
Using one unit
Using two units
Amplifier
‹YAMAHA DSP amplifier›
To AC outlet
This unitLeft speaker
‹Amplifier›
This unit This unit
To AC outlet To AC outlet
Amplifier
Right speaker
Left speaker
Pin plug
cords
Pin plug
cords
Notes on the above connections
• When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on
the rear panel of the subwoofer. If connected, they will not produce sound.
• When connecting this unit to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.
• For using a power amplifier and a preamplifier, the preamplifier must have two sets of PRE OUT terminals. If your preamplifier
has only one set of PRE OUT, connect this unit to the speaker terminals. (See page 6.)
Right speaker