Filter
Top Products
E-16
Functions for Recording
CD SYNCHRONIZED RECORDING
Using a compatible YAMAHA tape deck, you can synchro-
nize the tape deck to start recording automatically when a
CD starts playing. With this function, you can record a CD
on tape more easily and precisely. (Refer to the tape deck’s
operation manual to know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each
other so that both of them can receive the signals from
this unit’s remote control transmitter at the same time.
1 Select a disc.
2 Load a tape on the tape deck.
* The peak level searching function of this unit is
useful for adjusting recording level on the tape deck.
(Refer to page 21.)
3 Press the SYNCHRO button.
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit blinks.
4 If desired, select the track to be recorded first.
5 Press the w button.
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
6 If you want to stop recording temporarily and
restart recording from a desired track, follow
steps 3–5 again.
■ To cancel this function
Press the a button.
Notes
• To finish or stop recording, press the a button on the tape
deck.
• Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
pages 12–13 for the programming procedure.)
• This function can also be used together with the tape-
programming function. (Refer to pages 17–20.)
SYNCHRO DIMMER
PEAK
PROGCLEAR
TAPE
32
1
65
4
98
7
OUTPUT LEVEL
——
—
—
—
MODE
DISC SKIP
DISC SCAN
INDEX
100
OPEN/
CLOSE
TEXT/
TIME
RANDOM
REPEAT
DISC SKIP
DISC SCAN
2
4
1
5
DISC SKIP
PEAK
SYNCHRO
DISC SKIP
or
32
1
65
4
98
7
—
—
100