Xtant 4.4 Stereo Amplifier User Manual


 
SPECIFICATIONS
XTANT2.2 XTANT4.4
Frequency Response: 20 Hz-20 kHz ±1dB 20 Hz-20 kHz ±1dB
Number of Channels: 2 4
Watts per Channel @ 4Ω: 2 x 50 4 x 50
Watts per Channel @ 2Ω: 2 x 100 4 x 100
Bridged Mono @ 4Ω: 1 x 200 2 x 200
Recommended Load: 2Ω Stereo / 4Ω Bridged 2Ω Stereo / 4Ω Bridged
Distortion (THD): .1% .2%
20 Hz-20 kHz
at rated power, all channels
driven 4Ω
Signal to Noise Ratio: 100dB 100dB
A-weighted
in 20 kHz noise bandwidth
@ 1 volt sensitivity
Damping Factor: 200 @ 100 Hz 100 @ 100 Hz
with 4Ω load with 4Ω load
Input Sensitivity:
Unbalanced 100 mV-8.5 V RMS 100 mV-8.5 V RMS
Balanced 200 mV-17 V RMS 200 mV-17 V RMS
Input to Line Output Gain: 0dB 0dB
On-Board Crossover: HP: 12dB/Oct, Front-HP:12dB/Oct,
40-120 Hz 40-120 Hz
LP: 24dB/Oct Mono, Rear-HP: 12dB/Oct,
40-120 Hz or LP:24dB Mono LP,
40-120 Hz
Balanced Line: On Board On Board
Power Supply: Fully Regulated, PWM Fully Regulated, PWM
Operational Voltage: 10-16 Volts 10-16 Volts
Fusing Requirement: 30 Amp 60 Amp
Size (L x W x H): 11
11
16" x 9
1
16" x 2" 15
9
16" x 9
1
16" x 2"
297mm x 230mm x 51mm 395mm x 230mm x 51mm
A.R.C.: 0-15dB Level Adjustment 0-15dB Level Adjustment
Bass Boost: 0-12dB @ 45 Hz 0-12dB @ 45 Hz
Warranty: Limited 4 Year Parts Limited 4 Year Parts
and Labor and Labor
3