Filter
Top Products
OWNER’S INSTALLATION LOG
Upon installation of your mobile audio sound system, your
Authorized Xtant Select Dealer will complete this log. Keep this
owner’s manual with your vehicle as a reference for all amplifier
settings.
owner’s name:
Vehicle: year:
xtant amplifier serial no.
input sensitivity
(circle setting)
Front Inputs (2 channels) Rear Inputs (mono channel)
–20 dB –10 dB 0 dB +10 dB +20 dB –20 dB –10 dB 0 dB +10 dB +20 dB
Front Crossover (2 channels) Rear crossover (mono channel)
circle jumper setting: circle jumper setting:
Amplifier: 12dB / 24dB Amplifier: 12dB / 24dB
all high low all high low
rca outputs: 12dB / 24dB rca outputs: 12dB / 24dB
all high low all high low
frequency value (2 channels) frequency value (mono channel)
SIP High Pass FQ SIP High Pass FQ
sip low pass FQ sip low pass FQ
output gain adjustment noise gate adjustment
switch:
on off
threshold position
(draw arrow position)
Accessory modules (circle setting) (draw arrow position)
pqm-1 (FRONT) yes no Balanced Input
pqm-
1 chip frequency front rear
pqm-1 (REAR) yes no enable disable enable disable
pqm-1 chip frequency
Xtant Select Dealer
phone:
installation specialist:
date installed:
RIGHTLEFT MONO
12