Filter
Top Products
15
Troubleshooting
My XM radio is not receiving a signal. Use the “antenna aiming” feature on the XM
radio and move the antenna to another location.
My XM radio will not turn on. Check whether the power cord is plugged into
the wall.
Ensure batteries are fresh and inserted
correctly.
If applicable, make sure Auto-ON is enabled.
I only receive XM channels 0 and 1. Make sure your radio is activated. Contact XM
at www.xmradio.com or 1-800-XM-RADIO.
The radio and Sound System are on and
receiving a signal but I can’t hear anything.
Remove the radio from the Sound System and
re-insert it, then turn the power on.
Unplug any headphones.
Check the volume control.
Make sure “MUTE” is not set on the remote if used.
I hear noise or interference. Move away from any cordless telephones or
electrical appliances or other devices that may
cause interference.
My remote doesn’t work. Make sure that the IR sensors are not ob
-
structed.
It may be time to replace the battery in the
remote.
If this happens Try this
If the power LED is blinking change the
batteries.