Filter
Top Products
4
INSTALLATION – WIRE CONNECTION
When installing a speaker pair, it is recommended for the length of wire to be equal for each speaker. In the case of excess wiring,
simply hide the excess wire behind the wall.
Braided wire is the recommended application for in-wall and in-ceiling speaker installation.
Wire Length Recommended Size
Up to 50 feet 16-gauge
Up to 100 feet 14-gauge
Greater than 100 feet 12-gauge
Key Installation Points:
(1) Turn-off all amplifier or receiver power before making a speaker connection.
(2) Be sure the speaker impedance is compatible with the amplifier.
(3) Avoid running speaker wires near electrical wiring. The speaker wire should be at least 2 feet parallel from the AC line.
(4) Observe the correct polarity when making a speaker connection. See below.
All speaker and amplifier have corresponding positive (+) and negative (-) terminals. It is important to match the polarity, the positive
wire goes to positive terminal and the negative wire goes to negative terminal. Not doing so will result in wiring the speaker ‘out of
phase’ which results in poor speaker performance.