Xantech 16-Feb Radio User Manual


 
12/16 XT1
15
Program XT1 Zone
ID
888
Program XT1 Zone ID "number"
00..99
222
Return XT1 Zone ID
666
Program XT1 Tuner ID "number"
444
Return XT1 Tuner ID
00..99
Examples:
01_10_00_1_1 Instruct Zone 1 XT1 to power off
01_10_06_1_2 Instruct Zone 1 Tuner 6 XT1 to power on
01_10_00_1_3 Instruct zone 1 XT1 to power on if it is off, or power off if it is on
12_10_00_3_21 Zone 12 XT1 to tune into preset #21
03_10_00_4_107_50 Zone 3 XT1 to tune to FM 107.50 MHZ
03_10_00_4_99_55 Zone 3 XT1 to tune to FM 99.55 MHZ (The 2nd digit after the decimal is
50K/step tuning for Europe)
03_10_00_2_1 Switch band to AM reception
03_10_00_4_05_80 Zone 3 XT1 to tune to AM 580 KHZ
03_10_00_4_10_00_30 Zone 3 XT1 to tune to AM 1030 KHZ
01_10_14_6_1 Returns the RDS information of Tuner 14
01_10_00_6_4 RDS information is fed to third party device every 2 seconds.
01_10_00_8_0 Zone 1 XT1 to empty the preset currently displaying
01_10_00_8_15 Zone 1 XT1 to write the displayed frequency into preset 15
02_10_00_11_1 When in FM 100.05 MHZ, Zone 2 XT1 outputs FM10005 in ASCII string
02_10_00_11_5
When in FM 100.05 MHZ, Zone 2 XT1 outputs a complete set of operating
data
IFM10005IIPRESET 02IITUNING AUTOIIMODE STEREOIIZONE 02IIIR 1IIPOWER
ONI
2_10_00_11_2 Simply output "21" in ASCII if the current preset listening is 21
00_10_00_15_888_12 Program XT1 Zone ID TO 12
00_10_00_15_222 Read Zone ID
00_10_00_15_666_40 Program XT1 Tuner ID TO 40
00_10_00_15_444 Read Tuner ID
Notes for Programming:
Each time after sending a command to operate a XT1, always pause for 0.5 sec then send
command 11 to receive the update data feedbacks from the XT1.