Filter
Top Products
3
Before you begin using the RX16 receiver, make sure the IR transmitter
being used is transmitting on 2.3 MHz or 2.8 MHz frequencies. Make
sure the audio source is on, and the receiver battery is fully charged.
The RX16 Receiver has an automatic on/off function. When you put the
receiver on, it turns on. When you take the receiver off, it turns off. Use
the 3-position selection switch to choose from 2.3 MHz, 2.8 MHz, or stereo
mode. Rotate the Volume Control to adjust the volume to a comfortable
listening level.
A dual detector infrared “eye” is located on the front of the receiver. Do
not cover it up or you will lose reception. Make sure the “SOUND
PLUS” label is facing away from you when you put the receiver on.
The RX16 Receiver should be charged when not in use.
Optional multiple battery charger: CHG 238. Charges up to 12 BATAP97A
NiMH rechargeable batteries
Sound Plus
®
BAT AP97A
Rechargeable NiMH Battery
Volume Control Knob
Frequency Selection
Switch: 2.3 MHz,
2.8 MHz, Stereo
Fig. A (Front View)
OPERATING INSTRUCTIONS