Filter
Top Products
®
13
– or –
BELT CLIP INSTALLATION FOR PPA R35
TO INSTALL:
Position the belt clip on the rear of the R-35 receiver as shown in Figure 9a. Turn the belt clip 180º left
or right as shown in Figure 9b. The belt clip is now installed and ready for use.
T
O REMOVE:
Turn the belt clip 180º so the edge points toward the top of the unit as shown in figure 9b. Gently pull
the belt clip away from the unit to remove.
FIGURE 9B
FIGURE 9A
EARPAD CLEANING FOR PPA R35
Do not immerse the earphone in water or other cleaning agent. Foam pads may be removed and washed with
a mild laundry soap solution, rinsed thoroughly, and air dried. You may also opt to purchase new foam pads.
Call Customer Service for ordering information:
1-800-843-3544