Wharfedale Twin X Series Speaker System User Manual


 
POSE LOUDSPEAKER SYSTEMS
TWIN-X SUB ACTIVE PANEL FEATURES:
1. LINE INPUT: Balanced line line in socket
2. LINE OUTPUT: Balanced line out socket
3. VOLUME: The input level control controls the level of the input signal into the sub allowing low
frequencies to integrate into the system
4. CROSSOVER FREQUENCY: Switchable to 80, 100, 150 and 200Hz.
5. PHASE SWITCH: For smooth integration of the subwoofer into the system, the phase of the
subwoofer can be moved to any of four points between one half and a full phase rotation at
selected low pass frequencies. These four points are at 0, one quarter, one half and full phase
rotation which can be calculated for example using 80Hz to an approximate delay in position of 0
(ie in phase), 1 metre, 2 metres or 4 metres. These delay settings can also be specified in relation
to time offsets as “0”, 4, 8 and 16 milliseconds. These sophisticated controls allow the user to
accurately integrate the TWIN-X sub into a system for optimum sonic integrity and performance.
This facilitates the placement of the sub in a variety of positions with no time alignment problems.
6. AC SOCKET
7. POWER ON/OFF SWITCH
8. POWER ON LED INDICATOR
9. LIMITER LED: Output power overload/clipping circuit active indicator.
TWIN-15X ACTIVE SUBWOOFER AND TWIN-18X ACTIVE SUBWOOFER OPERATION:
1. Attach your signal cable to one of the input of of the Twin-15X or -18X Active subwoofer system. The
Active Subwoofer has two parallel balanced XLR and 1/4” jack input sockets and one unbalanced
stereo input/output socket.
2. Select the crossover frequency that you wish the subwoofer to deliver.
3. Select the phase setting that is correct for your subwoofer.
4. Adjust the subwoofer level control to suit the level of the satellite speakers in the system.