Filter
Top Products
10
CONNECTING HIFI SPEAKERS
Single wired a single amplifier, tri-link bar is fitted
Tri or Bi-wired – a single amplifier, with separate wires
to drive the bass/mid unit and the treble unit.
Additional links are supplied to allow Bi-wiring.
Tri or Bi-amplified – two or three amplifiers. One drives
each section or 2 sections with Bi-wire link e.g mid/hf.
(Remove all link sections when Tri-Amping)
Important Note, please make sure that heavy multi-standard
cables are well connected and clamped. Single loose strands
arcing can cause noise in the woofers like a faulty speaker.
opus
Using separate cables for
treble, mid and bass units in
Tri or Bi-wiring configuration
reduces intermodulation
effects and improves
headroom and clarity. To
Bi-wire, you will need to install
two lengths of twin core cable
between the amplifier and
each loudspeaker.
Unscrew each terminal a few
turns and remove the metal
tri-link straps. Use the
bi-link straps (supplied in
accessories) to connect the
treble and mid-range
terminals. Connect the cables
between the amplifier and the
loudspeakers as indicated and
re-tighten all the terminals
securely.
Note: Some amplifiers have
two pairs of output terminals
to facilitate bi-wiring but this is
not essential. The advantages
of bi-wiring are fully retained if
your amplifier has only one
pair of output terminals per
channel (as in the illustration).
R.SPKR
L.SPKR
AMPLIFIER
R.SPKR
L.SPKR
RIGHT
SPEAKER
LEFT
SPEAKER
RIGHT
SPEAKER
LEFT
SPEAKER
Amp
Amp