Wharfedale EVP-15P Speaker System User Manual


 
MODEL EVP-12P EVP-12PM EVP-15P EVP-15PM EVP-15PSB
FREQ RESP +/- 3 DB 60-20kHz 60 - 20kHz 50-20kHz 50 - 20kHz 40-250kHz
SENSITIVITY 1W@1M 97dB 97dB 98dB 98dB 98dB
NOMINAL COVERAGE HOZ 90º 90º 90º 90º -
NOMINAL COVERAGE VERT 60º 60º 60º 60º -
MAX SPL PEAK 121dB 121dB 123dB 123dB 123dB
PRODUCT DIMS (mm) H 544 435 644 443 630
W 424 424 459 445 465
D 363 550 363 624 374
SHAPE Trap Floor Monitor Trap Floor Monitor Trap
WEIGHT NET 24.1kg 23.4kg 26.3kg 25.6kg 32.6kg
WEIGHT GROSS
LF DRIVER SIZE (mm/ins) 250/12 250/12 380/15 380/15 380/15
MAGNET WEIGHT 1200g 1200g 1362g 1362g 2467g
HF DRIVER TYPE Compression compression Compression Compression -
COIL SIZE (mm) 44 44 44 44 -
EXIT SIZE (mm) 25/1 25/1 25/1 25/1 -
DIAPHRAGM MATERIAL Mylar Mylar Mylar Mylar -
PHASE PLUG TYPE Radial Radial Radial Radial -
SYSTEM BOX FREQUENCY 55Hz 65Hz 50Hz 60Hz 55Hz
PROTECTION TYPE Dynamic/AGC Dynamic/AGC Dynamic/AGC Dynamic/AGC -
OPERATING BAND PASS -- -- -- -- --
FINISH /COLOUR Carpet/Black Carpet/Black Carpet/Black Carpet/Black Carpet/Black
HANDLES QTY 21222
GRILLE Black Partial Black Full Black Partial Black Full Black Full
STAND ADAPTOR Yes - Yes - -
POLE MOUNT SOCKET -- -- -- -- Yes
MIXER SECTION:
CHANNEL 1 Switchable balanced mic level or line level input line level input
CHANNEL 2 line level input line level input line level input line level input line level input
INPUT SENSITIVITY
MIC: 5mv 5mv 5mv 5mv NA
LINE: 0.5v 0.5v 0.5v 0.5v 0.5v
INPUT IMPEDANCE
MIC: 470Ω 470Ω 470Ω 470Ω NA
LINE: CHANNEL 1 4.7K 4.7K 4.7K 4.7K 10K
CHANNEL 2 10K 10K 10K 10K -
INPUT CONNECTOR CHANNEL 1: combined jack and XLR
CHANNEL 2: Combined Jack and XLR & RCA Socket
LINE OUTPUT Balanced Male XLR type socket after level control
EQ: HF HF shelving +/-12dB@10Hz and below -
EQ: LF LF shelving +/-12dB@ 80Hz and below -
AMPLIFIER SECTION:
POWER AMPLIFIER 200W RMS 200W RMS 200W RMS 200W RMS 300W RMS
320W PEAK 320W PEAK 320W PEAK 320W PEAK 450W PEAK
DYNAMIC COMPRESSOR LIMITER Yes Yes Yes Yes Yes
ACTIVE CROSSOVER ----120Hz, 12dB
/Octave Slope
PROTECTION DC fault, 2 second muting at turn on, thermal and short circuit
0-180 DEGREE PHASE SWITCH ----Yes
Wharfedale International Limited, IAG House, Sovereign Court, Ermine Business Park, Huntingdon, Cambs, PE29 6XU England
WHARFEDALE website : www.wharfedalepro.com
IAG Professional reserve the right to alter or improve specifications without notice.All rights reserved © 2002 Wharfedale Pro. A member of the International Audio Group
A&E Spec EVP Powered Speakers EVP-P12, EVP-P12M, EVP-15P
, EVP-15PM
The powered, 2 way, full range loudspeakers systems shall incorporate one Low
Frequency Driver (12 inch for the EVP-P12 and EVP-P12M and 15 inch for the EVP-15P
and EVP-15PM) and one 1 inch exit compression driver. The Low Frequency Driver shall
be mounted in a low resonance composite wood material enclosure. The Hi Frequency
Compression Driver shall be loaded as part of a horn assembly. The EVP-P12 and the
EVP-15P shall have a nominal coverage of 90º (horizontal) and 60º (vertical).
The System Frequency Response shall vary no more than ±3dB measured on axis from
60Hz-20kHz on the 12 inch models and 50Hz-20kHz on the 15 inch models. The EVP-P
loudspeakers shall incorporate a low frequency amplifier module delivering 200 watts rms
to the internal components. The amplifier shall be designed and manufactured by
Wharfedale and in compliance with CE regulations. The amplifier controls and connec-
tions shall be mounted on a metal mounting panel with an external convection cooled alu-
minium heatsink contained and protected within the speaker system overall dimensions.
The EVP-12P, EVP-12PM, EVP-15P and EVP-15PM shall be trapezoidal in shape with 2
handles for easy transportation (except the EVP-12PM which has one handle). The
speakers shall be covered in black industrial carpet. The EVP-12P and EVP- 15P shall
feature a partial black perforated steel grille, the EVP-12PM and the EVP-15PM shall fea-
ture a full black perforated steel grille. The speakers shall include combined 1/4” TRS
and XLR input connectors. The 2 way full range powered loudspeaker systems shall be
the Wharfedale EVP-P Series.
A&E Spec EVP
Powered Speakers EVP-P15SB Sub Bass Unit
The powered sub bass unit shall incorporate one 15 inch Low Frequency Driver. The
Low Frequency Driver shall be mounted in a low resonance composite wood enclosure.
The System Frequency Response shall vary no more than ±3dB measured on axis from
40Hz-250kHz. The EVP-15PSB shall incorporate a low frequency amplifier module capa-
ble of delivering 300 watts rms to the internal components. The amplifier shall be
designed and manufactured by Wharfedale and in compliance with CE regulations. The
amplifier controls and connections shall be mounted on a metal mounting panel with an
external convection cooled aluminium heatsink contained an protected within the speaker
system overall dimensions. The EVP-15PSB shall be rectangular in shape, covered in
black industrial carpet, feature two handles and shall have a full black perforated steel
grille. The EVP-15PSB shall include combined 1/4” TRS and XLR connectors. The pow-
ered sub bass unit shall be the Wharfedale EVP-15PSB.