Titan
TM
Series
2
Read these instructions.
Keep these instructions.
Head all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such as radiators,
heat registers, Stoves, or other apparatus(including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type
plug has two blades and a third grounding prong.
The wider blade or the third prong are provided for
your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on
or pinched, particularly at Plugs, convenience
receptacles, and the point where they exit from the
apparatus.
Use only attachments/accessories specified by the
manufacturer.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Warning: To reduce the risk of fire or electrical
shock, do not expose this product to rain or moisture.
The product must not be exposed to dripping and
splashing and no object filled with liquids such as a
vase of flowers should be placed on the product.
No naked flame sources such as candles should be
placed on the product.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user's
authority to operate this device.
Warning: The mains power switch for this appliance
is located on the rear panel. To permit free access to
this switch, the apparatus must be located in an open
area without any obstructions.
ESSENTIAL INFORMATION FOR UK USERS
The power cord on your subwoofer may be supplied
with a plug incorporating a fuse, the value of which
is indicated on the pin face of the plug. Should the
fuse need to be replaced, an ASTA or BSI approved
BS1362 fuse must be used of the same rating. If the
plug is cut off it must NOT be re-used. Dispose of any
such plug safely. There is a danger of electric shock if
a cut-off plug is inserted into a mains socket.
The wires in the mains lead are coloured in
accordance with the following code: Green and
Yellow - Earth: Blue - Neutral: Brown - Live.
As the colours of the wires in the mains lead may
not correspond with the markings identifying the
terminals in the replacement mains plug, proceed as
follows:
The wire coloured Blue must be connected to the
terminal marked with the letter ¨N¨ or coloured
Black. The wire coloured Brown must be connected
to the terminal marked with the letter ¨L¨ or coloured
Red. The wire coloured Green and Yellow must be
connected to the terminal marked with the letter ¨E¨
, or coloured Green, or Green and Yellow, or marked
with the Earth symbol.
IMPORTANT SAFETY INFORMATION POWERED PRODUCTS
Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination avoid injury from
tip-over.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
This symbol indicates that dangerous
voltage constituting a risk of electric shock
is present within this unit.