Westone Laboratories WESTONE3 Headphones User Manual


 
IMPORTANT - Before using the earphones, be sure to turn
down the volume on your sound source.
Your True-Fit Earphones are marked with an “R” for the right
ear and an “L” for the left. A variety of eartip styles and sizes
are provided. Some experimentation may be necessary to
determine which provides you the most comfortable t and
best seal. When using a foam eartip, compress the foam by
rolling it between your ngers (g.1). It is not necessary to
compress any of the other eartips before insertion.
With the body of the earphone toward the back of your ear
and the cord pointing forward, insert the eartip into your ear
canal (g.2). If you have any trouble inserting the earphone,
reach over your head with your opposite hand and gently pull
up and back on the top of your ear. This will slightly straighten
your ear canal and may allow for easier insertion. Rotate the
earphone backward slightly until seated in your ear (g.3).
If using a foam eartip, hold the earphone in place for 5 to 10
seconds to allow the foam to expand and conform to the shape
of your ear canal.
The cords should run up, over and behind your ears. The
remaining cord can either be routed behind your head and down your back or under
your chin. If routed behind your head, slide the “cord zipper” up to the base of your skull
to help limit cord movement.
Insertion Instructions