Wegener Communications 550 Satellite Radio User Manual


  Open as PDF
of 7
 
QUICK START GUIDE
4 800072-02B www.wegener.com
Table 2: Unity 550 Front Panel Controls
LCD Menu Navigation
Operate the Unity 550 from the front panel using the arrow buttons and the LCD as shown in Figure 2.
Menu screens on the LCD direct you to screens that control various operating functions including:
programming
audio
Front Panel Functions
Programming Setup
1. Use the right or left arrow buttons to navigate to
Prgm:Prog1.
2. To edit, press
Enter.
3. To navigate to
Prog2 or Prog3, use the top and bottom arrow buttons.
4. To change, press
Enter.
Audio Setup
Use to setup
Audio 1 or Audio 2 as indicated on the rear of the unit chassis.
1. Use the right or left arrow buttons to navigate to
Aud:A01 or Aud:A02
2. To edit, press Enter.
3. To change, press
Enter.
Closed Captioning (CC) Setup
1. Use the right or left arrow buttons to navigate to
Sub:CC1.
2. To edit, press
Enter.
3. To navigate to
Sub:CC2 or Sub:CC3 or Sub:CC4, use the top and bottom arrow buttons.
4. To change, press
Enter.
Item Description
LCD Activates automatically by certain status conditions, such as loss of signal.
To manually activate, press the ENTER button.
Arrow buttons Push buttons activates LCD and selects options displayed.
ENTER Push button enters options selected on LCD.
 previous next