Filter
Top Products
Waves PuigTec MEQ-5 User Manual
10
Mid Dip
Range
0 to 11 (10dB cut)
Default
0
HiMid Frequency
Filter type
Bell
Cutoff points
1.5 kHz, 2 kHz, 3 kHz, 4 kHz, 5 kHz
Default
3kHz
HiMid Peak
Range
0 to 11 (10dB boost in 0.1 steps)
Default
0
In turns the EQ on/off but leaves the analog modeling.
Range
On/Off
Default
On
Mains controls analog characteristics caused by noise floor and hum, based on the power
supplies of the original units.
Range
Off, 50 Hz, 60 Hz
Default
60 Hz
Gain controls the output level.
Range
-18dB to +18dB (in 0.1dB steps)
Default
0dB