Filter
Top Products
High Shelf Atten
Range
0 to 11 (18dB attenuation, 0.1 steps)
Default
0
High Shelf Frequency (Atten Sel)
Range
5kHz, 10kHz, 20kHz
Default
20kHz
In turns the EQ on/off but leaves the analog modeling.
Range
On/Off
Default
On
Mains controls analog characteristics caused by noise floor and hum, based on the power supplies of the
original units.
Range
Off, 50Hz, 60Hz
Default
60 Hz
Gain controls the trim level.
Range
-18dB to +18dB (in 0.1dB steps)
Default
0dB
Meter displays output level in dBFS. The LED located in the upper right corner lights up when output
signal is clipping.
Waves PuigTec EQP-1A User Manual
11