Filter
Top Products
EENNGGLLIISSHH
PROTECTIVE CIRCUITS (SWEET 15.3, SWEET 25.2 only)
HF oscillation: This safety feature prevents from damages caused by frequencies above 20 kHz (feedback, etc.) by
switching the power amp off.
Temperature: Should the temperature controlled fan cooler prove to be insufficient in extreme conditions, this circuit
protects the output stage transistors from destruction by switching the device off.
Direct current (DC): This circuit continuously monitors the power amp output for direct current and protects the loud-
speakers from overload in case a transistor burns out.
GETTING STARTED
1. Make sure that the mains lead is connected and all external devices (effects) are properly connected and working.
2. Set the VOLUME control (Blue Cab 15.1, 30.1, 60.1) / MASTER control (Sweet 15.3, 25.2) to zero.
3. Plug your bass guitar into the amplifier's INPUT using a shielded cable.
4. Press the POWER switch to turn the device on.
5. Switch off MUTE - the red LED will turn off. (Sweet 15.3, 25.2)
6. Turn up all volume controls of your bass guitar.
7. Adjust the GAIN control until the clip LED flashes. (Sweet 15.3, 25.2)
8. Set VOLUME control (Blue Cab 15.1, 30.1, 60.1) / MASTER contol (Sweet 15.3, 25.2) to your desired volume.
9. Use the sound controls / switches to adjust the sound as described in the respective chapters FRONT PANEL CONTROLS.
10. If necessary readjust the GAIN. (Sweet 15.3, 25.2)
6