Wadia 861 COMPACT DISC PLAYER
10
Direct
Enter
Phase Invert
Input Scroll
DisplayBalance
Transport Time
Mode
A/B Repeat
Track
Forward / Rev
Play
Pause
Transport
Programming
Stop
Drawer
Open/Close
Search
Volume
Repeat
Single
Track
Index
Whenever the volume control buttons are pressed, the volume for both
channels will be increased or decreased by an increment of 1 on the display
screen. The range of the volume control is from 1 to 100, with each step
representing 0.5 dB change in volume.
Relative volume of each channel can be adjusted via the balance control but-
tons on the remote. Pressing one of the balance buttons increases the vol-
ume on that channel relative to the other by an increment of 0.2 on the dis-
play. This corresponds to a 0.1 dB change. The next time the button is
pressed the opposite channel is decreased. This way the overall volume
level (the sum of the two channels) remains constant within 0.1 dB.
The Wadia 861 has four digital inputs, plus the internal CD drive. Any of
the inputs can be selected from the remote control by pressing the input
button. Each time the input button is pressed, the next input is selected.
For example, if you are listening to CD input and you press the input select,
Input 1 will be selected, press it again, and Input 2 will be selected and
so on. After Input 4, the list will begin again with the CD input.
Whenever you select a new input, the display will switch to the Input Screen.
Adjusting the Volume
Adjusting the Balance
Selecting an Input
REMOTE CONTROL OPERATION
The Wadia 861 remote control requires three type-AAA batteries, which
you will find in the accessories kit. To install the batteries, remove the battery
cover on the back of the remote by removing the phillips head screws.
Insert the batteries as indicated on the battery holders.