Filter
Top Products
LED
ANT.
MIC
A
ON OFF
STANDBY
To install the UHF-3800 to a 19" rack case, complete the steps below.
1. Attach mounting brackets to the UHF-3800 via the supplied mounting screws.
2. Align the UHF-3800 with desired space in rack and slide in slowly, rear panel first.
.
3. While aligned, use rack case screws (not included) in the order shown below to stabilize the
UHF-3800 in its space, using the "X" rotation (numbered below) will ensure even tension
and plush alignment.
(See diagram below)
NOTE: Depending on your rack case design, it may be necessary
to allow for sufficient space for the antennas.
NOTE: Do not tighten screws firmly until all screws are in place.
Mounting
10