The light next to
the power port is
blinking.
• The transmitter and receiver may not be positioned for the best connection. Move the transmitter
to a new location. Ensure the transmitter and receiver are in areas free from obstructions. Do not
place the transmitter or receiver inside enclosures built from metal or other dense materials.
• When the light is solidly lit (stops blinking), the transmitter and receiver are linked.
What do the
lights below the
HDMI ports on the
transmitter mean?
• If the light is solid (not blinking), the HDMI connection is good and the input is set to that port.
• If the light is blinking, check the cable for a secure connection. Ensure your device is on and is
playing content. Ensure your device is set to output to its HDMI port.
Are 3D movies
and 3D gaming
supported?
• Yes, 3D is supported on 3D-capable TVs and devices. See your device’s user manual for details.
I am having trouble
changing inputs.
• Be sure to point the remote directly at the receiver when pressing the INPUT SELECTOR buttons.
When you press the buttons, the light below the selected HDMI port should turn on. If the remote
does not work, touch the INPUT control on the front of the receiver. Do not wear gloves when
using this control.
• You may need to replace the battery in the remote. See
Using the Remote
on page 10.
There is a delay
when I change
inputs (1, 2, 3, 4).
• This is normal. When changing the input, you may experience a delay of up to 20 seconds before
the picture is displayed on your TV.
12