Filter
Top Products
The remote
isn’t working.
• Make sure the plastic tab has been removed from the battery compartment.
• Replace the remote battery with a new one.
• Point the remote directly at the Sound Bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the
streaming application. (e.g., a music streaming app may not support the Back/Fast Rewind button.)
How do I listen to
SRS TruSurround or
Dolby Digital?
• To activate SRS TSHD, press the Menu button on the remote and use the arrow keys to scroll to the TSHD
screen to toggle between on and off.
• To listen to Dolby Digtal, your device must be playing content in Dolby Digital format. Dolby Digital is
only available over Digital Coaxial or Digital Optical.
I would like to adjust
the sound on the
Sound Bar.
• Adjust the bass and trebel levels using the remote
• Try enabling/disabling SRS TruSurround.
• Disable Night Mode if bass level is too low by pressing the Menu button on the remote and adjusting
the settings.
I want to return
my Sound Bar to
factory settings.
• Press and hold the Power, Volume Up, and Volume Down buttons for 10 seconds to return your Sound
Bar to its factory default settings.
When should I use
Night Mode or
SRS TruVolume
™
?
• Night mode reduces bass output of the Sound Bar so that listening to the bar is less likely to disturb
others. SRS TruVolume
™
reduces high volume content like commercials and increases low volume
content, like dialog, so that you have a more uniform listening experience. Night Mode and SRS
TruVolume can be turned on independently or together. • To listen to Dolby Digtal, your device must
be playing content in Dolby Digital format. Dolby Digital is only available over Digital Coaxial or Digital
Optical.