Vizio S4251W-B4 Speaker System User Manual


 
17
PROGRAM REMOTE
You can program your Sound Bar to accept TV remote IR commands. Press the Menu button on the remote, then use the Up/Down
buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
Function LED Behavior Description
Learn Volume
Down
(Waiting to learn)
Flash from Left to Right
and back
continuously.
All of the LEDs will
blink twice to confirm.
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume
Down, Volume Up, or Mute button on the TV remote control.
All of the LED Indicators on the Sound Bar will flash two times
indicating that it has successfully recognized the TV remote.
Learn Volume
Up
Learn Mute
Learn Vol -
Learn Vol +
Learn Mute
INPUT MENU
VIZIO
Ensure that both the Sound
Bar and TV remotes are
pointed at the front of the
Sound Bar.
Note: When using this function,
turn off your TV speakers. Refer to
your TV’s user manual for more
information.
TV Remote