Filter
Top Products
Power Fuse (Fuse 0.5A, 0.3A)
Fuse for 220/240V AC operation should be 0.3A and 0.5A for 120V AC.
AC Inlet
The power cord must be plugged into it.
* Power Cord Clamp
A plastic covered metal clip is provided to prevent accidental disconnection of the AC power cord.
Ground Lift Switch
The ground lift switch is effective to avoid ground loops that are often caused in connection with other
equipment and that may induce hum. Sliding the ground lift switch from a NORM position to the LIFT
position cuts ground loops and may reduce hum. For most applications it should be set to the NORM
position.
Output Connectors
The XLR output connector is balanced and is wired in parallel with the phone jack that can accept
tip/sleeve as well as a tip/ring/sleeve type of plug. The output impedance is 600 ohms.
Input Connectors
The XLR input connector is balanced and is wired in parallel with the phone jack that can accept
tip/sleeve as well as a tip/ring/sleeve type of plug. The input impedance is 10k ohms.
- 6 -
Rear Panel