Filter
Top Products
VPM-6228H USER MANUAL
11
Step3.
a) Replace the top
cover over the drive
assembly, making
sure the side groove
guide of the top cover
slides within the side
groove guide of the
bottom cover.
c) Attach the 4-pin
power cable from the
rear panel of the bottom
cover to the 4-pin con-
nector on the back of
the 5.25” device.
b) Attach the 40-pin IDE
cable from the rear
panel of the bottom
cover to the 40-pin con-
nector on the back of
the 5.25 “ device to en-
sure pin-1 to pin-1
connection, orient the
cable so the colored
stripe edge is closest to
the power connector.