Vienna Acoustics Waltz Grand Series Speaker User Manual


 
ACCESSORIES IN PAPER BOX
Wall mounting device: 1 pc.
for on-wall application.
Knurled screws: 2 pcs.
for connecting the cabinet with the wall mounting device.
Banana plugs: 2 pcs.
for connecting the speaker cables.
Teethed washer: 2 pcs.
must be used to prevent loosening of the knurled screws.
American wall mounting screws plus wall mounting anchors: 2 pcs.
European wall mounting screws plus wall mounting anchors: 2 pcs.
Transparent rubber feet: 4 pcs.
for stand alone application only!
for protection of the cabinet-bottom, if not wall mounting.
MOUNTING
After placing the wall-mounting anchor into the wall, fix the wall-mounting device
with the wall mounting screws.
ATTENTION:
Use the inner, longer hole of the wall-mounting device for vertical positioning.
Use the outer, round hole just for center position (horizontal positioning).
Center position (horizontal)
Vertical positioning
guide ways
Put the teethed washer on the knurled screws.