Filter
Top Products
10
Fit the EP adapter over the center spindle and follow the same
playing instructions as written above.
A detachable stylus light is available for this unit as an optional
extra.
Stylus light (Detachable mini light)
OPERATION
qPlace a record on the slip mat.
wSwitch on the unit using the Power on/off switch located on
the rear panel.
eRemove the stylus protector if applicable.
rStart the platter spinning with the START/STOP button.
The START/STOP functions of the PDX-2300 can be controlled
externally with equipment such as a foot switch peddle. An input
jack is provided for this remote control on the rear panel of this unit.
Remote Control
tPosition the tone arm over the record and gently lower to begin
playback.
ySet the playing speed to either 33 1/3 or 45 RPM.
If the power switch is turned off without pressing the
START/STOP button, the electric brake will not
function.
uMove the tone arm to the resting position and secure using the
tone arm clamp.
iPush the START/STOP button to stop the platter from
spinning.
oTurn the unit off.
Playing EP records
When turned on this unit is set to play at 33 1/3 RPM.
To adjust to a 45RPM speed setting, press the 45
RPM button. This unit does not use a cue lever
system for speed setting(s).