Filter
Top Products
PAGE 7
III. OVERVIEW
1. Unpacking
Your package contains:
• A V100A Reference mono Class A amplifier.
• A main power cord
• This user manual.
We advise to use the V100A Reference amplifier with VENTURE VP100 Reference
preamplifier. We will refer to this preamplifier RC5 remote control in this manual,
mainly concerning the power blocks Stand-By mode.
2. Positioning
Your V100A Reference amplifier must be installed in a place about 20 cm away
from the other appliance. This will guarantee the best signal-to-noise ratio.
You must keep about 20 cm of free space above the amplifier chassis, to allow
proper heat dissipation.
Height and positioning within your furniture must be thought in a manner, where
the angle with the remote control will not exceed 40 degree in both horizontal
and vertical axis.
Advise of use:
It is advised to lay the amplifier on an equipment platform on the floor.