Filter
Top Products
Starfire Series Manual
w
ww.chrysalisacoustics.com
1
C ONGRATULATIONS
C
ongratulations on your purchase of a Chrysalis Starfire™ subwoofer system. This system represents the state-of-the-art in home audio
reproduction and will provide you with years of listening pleasure when properly cared for. Read and follow this instruction manual to
insure safe and proper system connection and operation.
Caution!
Please observe the following instructions to insure safe and proper system operation.
Note: Do not leave unit in direct sunlight or use in high humidity environments!!!
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do not open speaker enclosure or
amp chassis cover. Please observe all warnings on the equipment itself. There are no user serviceable parts inside. Please refer all service
questions to your authorized Chrysalis dealer.
Prior to Installation:
Please unpack the system carefully. This unit is heavy. Use caution when lifting or moving to avoid injury. Please save the carton and all
packaging materials for future use. Packing this unit in any other carton may result in severe damage when shipping. Record the serial
number in the space provided on page 13 for future reference.
Product Features
• A single driver consisting of either:
- 10” (8.2” piston diameter) subwoofer with 2.0” high-temp voice coil and 89.6 ounce (5.6 lb) motor structure or,
- 12” (9.7” piston diameter) subwoofer with 2.0” high-temp voice coil and 89.6 ounce (5.6 lb) motor structure
• Adjustable (50 to 200 Hz) low-pass crossover with a 12 dB/octave slope
• Line-level (RCA) inputs
• Speaker-level inputs and outputs with spring loaded terminals
• Signal sensing auto turn on/off
• Variable volume control
• Selectable phase control (0° or 180°)
• Green power on/ Red power standby mode indicator LED
Prepare for Installation
Y
o
ur new Chrysalis subwoofer provides for a number of installation options. Read all the installation information below in order to
d
etermine which installation option is best for your system.
R
emember to perform all installation procedures with system power turned
off to prevent possible damage.