Filter
Top Products
1
NOTES:
P
CONGRATULATIONS!
Congratulations on your purchase of a Velodyne subwoofer system. This
system represents the state-of-the-art in low frequency reproduction and
will provide you with years of listening pleasure when properly cared for.
Read and follow this instruction manual to insure safe and proper
system connection and operation.
Caution!
Please observe the following precautions to insure safe and proper
system operation.
NOTE: Do not leave unit in direct sunlight or use in high
humidity environments!!!
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or
moisture. To avoid electrical shock, do not open speaker enclosure or
amp chassis cover. Please observe all warnings on the equipment itself.
There are no user serviceable parts inside. Please refer all service
questions to your authorized Velodyne dealer or service representative.
Prior to Installation
Please unpack the system carefully. This unit is heavy. Use caution
when lifting or moving to avoid injury. Remove all staples used to seal
the carton as they can scratch the cabinet. Please save the carton and
all packaging materials for future use. Packing this unit in any other
carton may result in severe damage when shipping. Record the serial
number in the space provided on the warranty card for future reference.
PRODUCT FEATURES
• 230V
• 8” (6.5” piston diameter) driver with 2.5” high-temp voice coil
and 107 ounce magnet/204 ounce motor structure
• Built-in 2000 watts Dynamic/1000 watts RMS high efficiency
Class D amplifier
• Adjustable (40 to 120 Hz) low-pass crossover (defeatable)
• Line-level (RCA) inputs and outputs
• LFE Input
• Speaker-level inputs with five way binding post connections
• Signal sensing auto turn on/off (defeatable)
• Variable volume control
• Selectable phase control (0° or 180°)