Filter
Top Products
Installation — Step-By-Step
2
.
www.velodyne.com
SC-IF/IC User’s Manual
Step 1 -
Determine installation location. As stated above, the SC-IF/IC can be mounted virtually
anywhere. The only requirements are that the cabinet fit into the location, and that there be
proper venting for the audio to be passed into the listening environment.
Step 2 -
Mark installation location. It is useful to place the subwoofer cabinet in its proposed position
and mark the locations of the four brackets that will be used to affix the subwoofer to the
framing. Note that the brackets can be mounted ANYWHERE on the subwoofer cabinet, as
long as the brackets do not interfere with the woofer’s operation. Always use all four brackets
in the installation. It is recommended that the cabinet be positioned flush with the face of the
joists for ease of positioning and installation, but this is not r
equired. Make sure the speaker
terminals are facing the direction you intend to run the speaker wire.
Figur
e 1: Mark bracket locations with a pencil.
Note: The brackets can be attached anywhere on the SC-IF/IC cabinet.