Filter
Top Products
3
.
www.velodyne.com
SC-600 IF/IC User’s Manual
S
tep 3 -
D
etermine and mark grille location. From the centerline of the subwoofer driver, mark off
the dimensions of the grille opening to accommodate the decorative grille chosen for the end
user installation.
Step 4 -
Prepare the installation location. Make whatever modifications are required to enable the
subwoofer to fit in the installation location. Note that the SC-600 IF/IC is designed for joists
on 16” centers. Install spacer studs as required to accommodate this dimension.
Step 5 -
Attach the PSA-sided foam strips to the subwoofer cabinet. MAKE SURE STRIPS ARE USED
ANYWHERE THE CABINET WILL COME INTO CONTACT WITH THE STRUCTURE IN ANY WAY.
The SC-600 IF/IC is a powerful subwoofer and will likely buzz or rattle if not isolated from the
structure using the provided foam strips.
Figure 2: Affix foam strips.