Filter
Top Products
4
.
www.velodyne.com
DPS User’s Manual
T
he following table shows the settings for various presets:
S
ubsonic
Filter EQ EQ Volume
Preset Frequency Frequency Level Differential
Movies 24 Hz 37 Hz +4 dB +8 dB
R&B – Rock 27 Hz 52 Hz +3 dB +5 dB
Jazz – Classical 24 Hz N/A N/A N/A
(Reference)
Games 34 Hz 62 +4 dB +4 dB
RESTORE DEFAULTS – This feature allows you to restore default settings for your DPS
subwoofer. By pressing the presets in EXACTLY the following order on the front panel display,
the unit’s power light will blink three times indicating that you have restored defaults.
1. Movies
2. R&B – Rock
3. Jazz – Classical
4. Games
5. Games
6. Jazz – Classical
7. R&B – Rock
8. Movies
When you press the presets in the above order, the power light will blink three times indicating
that you have restored defaults. The default preset is Jazz-Classical, and the unit’s volume is
reset to level 35 (out of 100).
Night Mode
Night mode limits the maximum output of the subwoofer for late night listening or to be mor
e
considerate of close neighbors. Press the NIGHT button to turn the night mode feature on or
of
f. Engaging the night mode causes the LED lights to bur
n less brightly. Night mode does not
universally diminish the volume, rather, on louder passages, the maximum output of the unit is
limited. It may be that you will hear little or no difference in the output of the woofer when night
mode is activated. However, when an explosion or other loud transient is played, you should
notice less ouput.
VOLUME Contr
ol
This control allows you to balance the output from the subwoofer to the main speakers in your
system. This contr
ol should be set to achieve similar volume level fr
om between both the main
speakers and subwoofer
. When pressing volume up or down, the speed at which the power light
blinks indicates subwoofer volume - the faster the blinking, the louder the unit plays. After the
volume is changed (up or down), there will also be two sets of center LED blinks. Slower blinks
represent tens and faster blinks represent ones. If the LED blinks three times, pauses, then blinks
six times, this means that the volume is set at 36. The volume range is from 1 to 99.