Uniden 250 Radio User Manual


 
Getting Started
Mounting the Cradle
Mount the Cradle to either a counter or wall.
To counter:
Attach the Cradle using the mounting screws and wash-
ers as follows.
To wall:
Apply the Cradle to the wall and insert
the two mounting screws into the larger
holes of the Cradle
Push down the Cradle until it is firmly seated.
When you remove the Cradle from the wall, loosen
the screws and push the Cradle up.
Attaching the Antenna
Apply the antenna to the radio as
shown. Be sure the antenna is firmly seated.
Attaching the Rechargeable Battery Pack
1
Snap the battery release clip out and
remove the alkaline battery case.
Then place the rechargeable battery
pack onto the back of the radio. It will
only fit in one way.
2
Snap the battery release clip until it
clicks. Be sure the battery pack fits
tightly against the body.
8
Contacts