Uniden D1760-2 Headphones User Manual


 
10
To… Press...
dial the
highlighted
number
Talk/Flash
or
sPEakEr.
(If the number is a toll call but there is no 1 at the
beginning, press
*
to add 1 before dialing.)
close the lists
PhonEbook
.
For individual record options, highlight a number and press
MEnu/sElEcT
:
Delete Entry
Erase the number from the list.
Store Into Pb
Add the number to the phonebook. The handset prompts
you to edit the name and number and select a personal ring.
Delete All
(CID list only) Erase all numbers from the list.
Using Call Waiting
Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
If you get a Call Waiting call, the phone sounds a tone and displays
any CID information received from the waiting call. Press
Talk/Flash
to switch between the current call and the waiting call; each time you
switch, there is a short pause before you're connected to the other call.
Using the Phonebook
The phone can store up to 100 entries in its phonebook. All handsets share
the same phonebook, so only one handset can access it at a time.
To... Press...
open/close the phonebook
PhonEbook
.
scroll through the entries
down
to scroll through the entries from A to Z.
uP
to scroll from Z to A.
jump to entries that start
with a certain letter
the number key corresponding to the letter
you want.
dial the current entry
Talk/Flash
or
sPEakEr
.
edit the current entry
MEnu/sElEcT
, then select
Edit
.
delete the current entry
MEnu/sElEcT
, then select
Delete
. When the
phone prompts you to confirm, select
Yes
.
make a speed dial call
Press and hold the speed dial number (0 - 9)
for 1.5 seconds. The speed dial entry displays.
Press
Talk
or
sPEakEr
to dial the number.